We are going to setup this connection manually so we can forward ports to your PS3. On the next page select Wired or Wireless connection depending upon how your PS3 is connected to your network.
Go ahead and go back to the Netowrk Settings menu.Īfter you have selected Network Setting, move to the right and select Internet Connection Settings in the list that comes up.Īn short message will pop up. You will change the last octet of the IP Address and enter it below as well. You will use same Subnet Mask, and Default Router down below. Write down the IP Address, Subnet Mask, and Default Router displayed here. Network Settings should be at the very bottom of the list.Īfter you have selected Network Setting, move to the right and select Settings and Connection Status List in the list that comes up. Turn on your PS3, and then navigate to the Settings option on the main menu. The dynamic IP address server is generally refered to as the dhcp server.
So when you asign a static IP addresses, it's important to assign an IP address that will not be handed out to other devices by the dynamic IP address server. So the very same ip address may be handed to another computer or console later, and that will prevent both devices from connecting to the internet. When you set your PS3 to a static ip address, the router does not know that the PS3 is using that ip address. The router then hands it an ip address that has not already been handed out to another computer or console. Every time a computer or console reboots it asks the router for an ip address. When ip addresses are assigned dynamically, the router is the one that assigns them. The end user can simply plug their computer or console in, and their network will work. They do this because dynamic ip address networks require no configuration. For more information on ip addresses, subnets, and gateways go hereĭynamic vs Static IPs Most routers assign dynamic IP addresses by default. But if you want to know more about how networks work, you'll find it there. There is a lot of information at the following link. If they do, neither of them will be able to connect to the internet. Every computer has at least one ip address, and two devices should never have the same ip address. IP addresses are four sets of numbers separated by periods that allow computers to identify each other. So the port forwarding configuration will not work. When this happens the ports will no longer be forwarded to your PS3's ip address. Without setting up a static ip address port forwarding will probably work when you initially set it up, but after restarting your PS3 it may get a different ip address. When you have port forwarding setup, your router forwards ports to an ip address that you specify.
It is very important to setup a static ip address, if you are going to use port forwarding. J(Last Updated: September 17, 2021) | Reading Time: 5 minutes
0 kommentar(er)
